Published in
Bluetooth modules
Saturday, 19 September 2020 12:51
Ti SimpleLink Bluetooth® Low Energy wireless MCUs
Low-power wireless standard to easily connect any product to smartphones or tablets
Published in
Development Board
Friday, 18 September 2020 23:17
STMicroelectronics Bluetooth low energy expansion board based on the BlueNRG-M0 module for STM32 Nucleo X-NUCLEO-IDB05A2
The X-NUCLEO-IDB05A2 Bluetooth low energy expansion board is based on the BlueNRG-M0 BLE network processor module.
The BlueNRG-M0 is Bluetooth v4.2 compliant, FCC and IC certified (FCC ID: S9NBNRGM0AL; IC: 8976C-BNRGM0AL). It supports simultaneous master/slave roles and can behave as a Bluetooth low energy sensor and hub device at the same time.
The BlueNRG-M0 provides a complete RF platform in a tiny form factor, with integrated radio, antenna, high frequency and LPO oscillators.
The X-NUCLEO-IDB05A2 is compatible with the ST morpho (not mounted) and Arduino UNO R3 connector layout.
The X-NUCLEO-IDB05A2 interfaces with the STM32 microcontroller via the SPI pin and allows changing the default SPI clock, SPI chip select and SPI IRQ by replacing a resistor on the expansion board.
Wednesday, 02 September 2020 08:07
Nordic S132 High-performance Bluetooth Low Energy protocol stack
SoftDevice S132 is a high-performance Bluetooth® Low Energy protocol stack for the nRF52810 and nRF52832 System-on-Chips (SoCs). It supports up to 20 concurrent links in all roles (Broadcaster, Central, Observer, Peripheral). It is Bluetooth 5.1 qualified and supports the following Bluetooth features: high-throughput 2 Mbps, Advertising Extensions and channel selection algorithm #2 (CSA #2). The number of connections and bandwidth per connection are configurable, offering memory and performance optimization.