Chips (5)
Chips
子栏目
- Overview：
- The AC781x product serials is MCU of automotive grade, complies with the AEC-Q100 specification, and is suitable for automotive electronics and high reliability industrial applications.Typical applications cover BCM, T-BOX, BLDC motor control, industrial control, AC charging piles, etc.
The AC781x device family is based on ARM Cortex®-M3 core, running up to 100MHz，up to 256KB Flash memory，supply voltage ranges from 2.7 to 5.5V, excellent EMC/ESD capability to be suit for harsher environment.
- Features：
- - ARM Cortex®-M3 core,100MHz, single cycle 32x32 multiplier
- Support up to 256KB embedded Flash memory
- Support up to 64KB RAM
- Support 2*CAN 2.0B
- Support 1*LIN 2.1, 1*URAT LIN
- Support 2*SPI
- Support up to 6*UART
- Support 2*I2C
- 2.7-5.5V power supply
- Temperature range: -40 to 125 °C
栏目
Chips
Optic quadrant
星期四, 05 04月 2018 03:26
Sumitomo Steel Wire's - Oil Tempered Wire for Engine Valve Spring
男作者 Blue Star
The production process of oil tempered wire consists of drawing, heating to above autenitizing temperature and quenching into oil or equivalent quenchant, so that fine tempered martensite having high fatigue strength and enough ductility is obtained.
Our oil tempered is using super clean steel to minimize the risk due to non metallic inclusion. Since the state of the art technologies and well established quality management system are applied, our oil tempered wire shows outstanding performance and has good reputations among global customers.
Instructions
Since 0il tempered wire is susceptible to hydrogen brittleness and delayed fracture, please observe the following instructions.
- Tempering shall be applied immediately after coiling.
- Pickling nor plating shall not be applied.
- The wire shall not be used under corrosive environment.
星期六, 14 10月 2017 04:29
Z-Laser 3D Laser projector LP-HFD2 Specification
Z-Laser 3D Laser projector LP-HFD2 Specification